Stainless Steel Perchloric Hood with model 1200

Protector Stainless Steel Perchloric Acid Laboratory Hoods

Protector Stainless Steel Perchloric Acid Laboratory Hoods are designed specifically for procedures involving the use of perchloric acid. They feature washdown systems, integral work surfaces and drainage troughs so that they may be thoroughly rinsed after each use to prevent the accumulation of potentially reactive perchloric salts.

Available in 4, 5, 6 and 8-foot widths, these benchtop hoods feature a corrosion-resistant Type 316 stainless steel interior to withstand reaction from perchloric acid. The one-piece liner is free of joints, cracks or crevices to prevent build-up of residue and simplify decontamination procedures.

Use Our Product Selection Tools

Scout™ Lab Equipment Selector

Let Scout lead you to the right laboratory hood or sample prep equipment for your application.

Featuring washdown systems, integral work surfaces and drainage troughs, these benchtop stainless steel-lined hoods are designed specifically for procedures involving perchloric acid.

Features (All Models)

By-pass airflow design and by-pass block
Curved Eco-Foil™ air foil allows air to sweep the work surface while Clean-Sweep™ openings pull inflow air from under the air foil
Glacier white, powder-coated steel exterior
Cord-Keeper™ slots on left and right side of air foil
Seamless Type 316 stainless steel liner (23.5" interior depth) with radiused corners, integral work surface, drainage trough and pre-set baffle(s)
Black enamel-coated hardboard supporting surface
Tempered safety glass vertical-rising sash with cable and pulley
Removable front and side panels and front access panels for access to plumbing and electrical wiring
Pre-wired LED lighting with vapor-proof design and ADA-compliant light and blower switches. Lighting rated to 50,000 hours
Built-in washdown system with internal piping and spray nozzles with maximum flow rate from 0.5-1.0 GPM
Washdown fitting located on top of hood to facilitate onnection to external wash rings (wash rings not included)
11.0" OD Type 304 stainless steel exhaust connection(s)

Fixtured Models May Feature

Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing for gas and lower left side with copper tubing for air. Components for converting either or both fixtures to cold water and vacuum are provided. Inlet tubing is not provided.
One pre-wired GFCI electrical duplex receptacle on lower right side and, on 8' models, one additional pre-wired GFCI electrical duplex receptacle on the lower left side.

Options

4', 5', 6' and 8' widths

Required Accessories (Not Included)

Dedicated remote PVC blower
Wash rings and other ductwork
Base cabinet or stand

Optional Accessories

Service Fixture Kits
Electrical Duplex Kits
Washdown Valve Kit
Guardian Airflow Monitor Kits
Sash Stop Kits
Ceiling Enclosure and Rear Finish Panel Kits

Compliance

SEFA 1
NFPA 45
ASTM E84-09C
ASHRAE 110
ANSI Z9.5
SEFA 8
CFR 29, Part 1910
UL /61010-1
CAN/CSA C22.2 No. 61010.1
UL 1805

Our Product Representatives Are Here To Help

Chemical Fume Hood Installation

This video shows how to install a Labconco Protector Fume Hood. This video features a Protector XStream Fume Hood, and most installations are similar.

Fume Hoods Overview 2013

Literature & Resources

Brochures
- Protector Special Application Laboratory Fume Hoods Brochure
  This brochure contains ordering information, specifications and dimensional data for Protector Stainless Steel Radioisotope, Stainless Steel Perchloric Acid and PVC Perchloric & Acid Digestion Laboratory Hoods.
  View Files
User's Manuals
- Protector Stainless Steel Perchloric Acid Laboratory Fume Hoods
  For Protector Stainless Steel Perchloric Acid Laboratory Fume Hood models 1304, 1305, 1306 ns 1308 Series.
  View Files
- Wiring Diagram for 4', 5' and 6' Protector Series Laboratory Hoods (115 volt)
  For Protector XStream, Premier, XL Benchtop, XL Floor-Mounted, Stainless Steel Radioisotope, Stainless Steel Perchloric Acid, PVC Perchloric Acid and PVC Acid Digestion Laboratory Hoods for 115 volt, 60 Hz operation. Part number is 9826500, Rev. -.
  View Files
- Wiring Diagram for 4', 5' and 6' Protector Series Laboratory Hoods (230 volt)
  For Protector XStream, Premier, XL Benchtop, XL Floor-Mounted, Stainless Steel Radioisotope, Stainless Steel Perchloric Acid, PVC Perchloric Acid and PVC Acid Digestion Laboratory Hoods for 230 volt, 50/60 Hz operation. Part number is 9834200, Rev. -.
  View Files
- Wiring Diagram for 8' Protector Series Laboratory Hoods
  For Protector XStream, Premier, XL Benchtop, XL Floor-Mounted, Stainless Steel Radioisotope, Stainless Steel Perchloric Acid, PVC Perchloric Acid and PVC Acid Digestion Laboratory Hoods for 115 volt, 60 Hz operation. Part number is 9827300, Rev. -.
  View Files
- Wiring Diagram for 8' Protector Series Laboratory Hoods
  For Protector XStream, Premier, XL Benchtop, XL Floor-Mounted, Stainless Steel Radioisotope, Stainless Steel Perchloric Acid, PVC Perchloric Acid and PVC Acid Digestion Laboratory Hoods for 230 volt, 50/60 Hz operation. Part number is 9834300, Rev. -.
  View Files
En Español
- Campanas extractoras para laboratorios Protector y Basic
  Proporciona beneficios, especificaciones y fotos. La protección del entorno de su laboratorio es el fundamento del desarrollo de nuestros productos y cada campana extractora Labconco está diseñada pensando en la seguridad. Cuando los ingenieros de Labconco diseñaron la más reciente generación de campanas extractoras para laboratorios Protector XStream, Premier y XL, en adición a la seguridad, consideraron el ahorro en el consumo de energía.
  View Files
White Papers
- Perchloric Acid Fume Hood Mechanical Systems
  This paper describes fume system design components, safe practices and decontamination procedures related to perchloric acid use.
  View Files
3-Part Specs
- Protector Stainless Steel Perchloric Acid Laboratory Hoods Specifications
  View Files
Installation Qualification / Operation Qualification
- Installation Qualification/Operation Qualifications Protocol for Protector Series Laboratory Fume Hood
  For validation of predetermined Protector Series Laboratory Fume Hood specifications. Provides a checklist of installation and operation qualifications to complete when beginning operation on new or used Protector Series Laboratory Fume Hoods.
  View Files

Search

Protector Stainless Steel Perchloric Acid Laboratory Hoods

Use Our Product Selection Tools

Scout™ Lab Equipment Selector

Features (All Models)

Fixtured Models May Feature

Options

Required Accessories (Not Included)

Optional Accessories

Compliance

Our Product Representatives Are Here To Help

Product Service

Service Advisor

Chemical Fume Hood Installation

Fume Hoods Overview 2013

Literature & Resources

Brochures

Protector Special Application Laboratory Fume Hoods Brochure

User's Manuals

Protector Stainless Steel Perchloric Acid Laboratory Fume Hoods

Wiring Diagram for 4', 5' and 6' Protector Series Laboratory Hoods (115 volt)

Wiring Diagram for 4', 5' and 6' Protector Series Laboratory Hoods (230 volt)

Wiring Diagram for 8' Protector Series Laboratory Hoods

Wiring Diagram for 8' Protector Series Laboratory Hoods

En Español

Campanas extractoras para laboratorios Protector y Basic

White Papers

Perchloric Acid Fume Hood Mechanical Systems

3-Part Specs

Protector Stainless Steel Perchloric Acid Laboratory Hoods Specifications

Installation Qualification / Operation Qualification

Installation Qualification/Operation Qualifications Protocol for Protector Series Laboratory Fume Hood

Related Products