Protector Echo Filtered Fume Hoods

The Protector Echo Filtered Fume Hood requires no ducting and is available in 4', 5', 6' and 8' widths. Neutrodine® Unisorb Filtration Technology offers comprehensive molecular filtration. eGuard® communication software offers real-time monitoring on the user’s phone or computer. From a remote location, data such as usage authorization, filter saturation detection, sash position and temperature may be observed and managed.

Erlab-proven Neutrodine® Unisorb Filters are the heart of GFH Filtration Technology.

Benchtop models include a fiberglass panelized liner with optional side windows, or with optional side and back windows. Models are available for carbon-only, carbon with acid sensor, carbon with formaldehyde sensor, or HEPA-only filtration. Filters are sold separately. To determine if your application is right for a Protector Echo, please request a Chemical Assessment from a Labconco specialist who can recommend the appropriate enclosure and filters for your application.

*Available only in the Americas, filters required

Eco-friendly DH III or better protection. No ducting. Our fully-featured, containment-enhancing fume hood with Erlab's Neutrodine Unisorb technology.

Features (All Models)

Eco-Foil™ air foil with aerodynamic Clean-Sweep™ airflow openings
Cord-Keeper™ Slots on left and right side of air foil
Removable front and side panels, and front and interior service access panels (except side window models) for access to plumbing and electrical wiring
By-pass airflow design
Glacier white powder-coated steel exterior
Chemical-resistant, fiberglass-reinforced, composite panel liner
Pre-wired vapor-proof LED lights for up to 63 foot candles rated for 50,000 hours: 2 lights per 4' model, 3 lights per 5' model, 4 lights per 6' model, and 5 lights per 8' model
eGuard2 software communication
Smart control command module with wifi, Bluetooth and ethernet connectivity
Factory-installed command module, fan button and light button
Roughing prefilter: 2 each per 4' model, 3 each per 5' model, 4 each per 6' model, and 5 each per 8' model
Built-in exhaust fans: 2 each per 4' model, 3 each per 5' model, 4 each per 6' model, and 5 each per 8' model, to maintain 60 fpm face velocity at 16" sash opening height
Sound pressure of <60 dB(A) with sash at operating height and <48 dB(A) with sash closed
Sensor package for primary filter breakthrough of solvent and acid fumes, laboratory air quality, sash position, and temperature
Audible/visual alarms for breakthrough detection, temperature ≥40° C (104° F), fan failure and high sash position opening. At ≥60° C (140° F), all fans stop
Single piece, tempered safety glass vertical-rising sash with cable pulley, sash weight and powder-coated aluminum sash handle and tracks with airflow openings. Sash stop at 16" sash opening height. Sash opens to 28" high for loading
Factory-prepared for up to four electrical duplex receptacles and eight service fixtures
37.5" high sightline from the work surface and header panel
Power cord with plug

Window Models May Feature

Right and left side-mounted tempered safety glass windows, 15.0" deep x 26.5" high
Rear tempered safety glass window, 32.4" high

Fixtured Models May Feature

Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing for gas and lower left side with copper tubing for cold water. Components for converting either or both fixtures to air and vacuum are provided. Inlet tubing is not provided
One pre-wired GFCI electrical duplex receptacle on lower right side and, on 8' models only, one additional pre-wired GFCI electrical duplex receptacle on the lower left side

Required Accessories (Not Included)

Neutrodine® Unisorb Filters (except HEPA only models which require HEPA filters). Number of filters required is determined by the width of the hood
Work Surface
Base Cabinet or Stand

Options Available Include

HEPA filter
Sash Opening Wing Reduction Kits
Region-specific electrical plug configurations
Service fixtures

Compliance

SEFA 9, DHIII
SEFA 8, Cabinet Surface Finish Tests
Modified ASHRAE 110
ANSI Z9.5-2011
AFNOR NF-X 15-211
ASTM E84-09C
UL Standard 61010-1
CAN/CSA C22.2 No. 61010-1

Our Product Representatives Are Here To Help

Fume Hood Safety & Best Practices

Proper use of your fume hood is vital to maintaining a safe laboratory environment. In this video, we highlight the essential do's and don'ts of fume hood safety, ensuring you stay protected while working with hazardous materials.

Benefits of Protector Echo & Airo Filtered Fume Hoods Unique Features

This video shows how filtered fume hoods completely eliminate the largest expense of maintaining a laboratory. Patented features for safety, filtration and connectivity make these hoods uniquely adaptable for a wider variety of uses than any ducted hood.

Quick and Easy Echo and Airo Filtered Fume Hood Installation

Labconco Protector Echo and Airo Filtered Fume Hoods are simple to install because they require no ductwork. One of the fastest ways to expand your lab or create flex space for chemical work.

Literature & Resources

Brochures
- Protector Echo and Airo Filtered Fume Hoods Brochure
  This brochure provides an overview, features & benefits, specifications, ordering information, dimensional data and accessory ordering information on the Protector Echo and Airo Filtered Fume Hoods.
  View Files
- Spanish-Language Protector Echo and Airo Filtered Fume Hoods Brochure
  This Spanish-language brochure provides an overview, features & benefits, specifications, ordering information, dimensional data and accessory ordering information on the Protector Echo and Airo Filtered Fume Hoods. En français.
  View Files
User's Manuals
- Protector Echo and Airo Filtered Fume Hoods Manual (2020-Present)
  For models with the following part numbers manufactured September 2020 to present.
  180 Series – 4', 5', 6' and 8' Protector Echo
  181 Series – 4', 5', 6' and 8' Protector Echo with side glass
  182 Series – 4', 5', 6' and 8' Protector Echo with 360 degree visibility
  183 Series – 4', 5', 6' and 8' Protector Echo Floor-Mounted
  184 Series – 3' and 4' Protector Airo
  View Files
3-Part Specs
- Protector Echo Filtered Fume Hoods Specifications
  View Files
CAD Drawings
- 4' Protector Echo Filtered Fume Hood
  4' Protector Echo Filtered Fume Hood
  View Files
- 5' Protector Echo Filtered Fume Hood
  5' Protector Echo Filtered Fume Hood
  View Files
- 6' Protector Echo Filtered Fume Hood
  6 Protector Echo Filtered Fume Hood
  View Files
- 8' Protector Echo Filtered Fume Hood
  8 Protector Echo Filtered Fume Hood
  View Files
Revit
- 4' Protector Echo Revit Files
  View Files
- 5' Protector Echo Revit Files
  View Files
- 6' Protector Echo Revit Files
  View Files
- 8' Protector Echo Revit Files
  View Files
Installation Qualification / Operation Qualification
- Installation Qualification/Operation Qualifications Protocol for Protector Echo and Airo Series Laboratory Fume Hood
  For validation of predetermined Protector Echo and Airo Series Laboratory Fume Hood specifications. Provides a checklist of installation and operation qualifications to complete when beginning operation on new or used Protector Echo and Airo Series Laboratory Fume Hoods.
  View Files

Search

Protector Echo Filtered Fume Hoods

Features (All Models)

Window Models May Feature

Fixtured Models May Feature

Required Accessories (Not Included)

Options Available Include

Compliance

Our Product Representatives Are Here To Help

Application Specialists

Application Specialist

Product Service

Service Advisor

Fume Hood Safety & Best Practices

Benefits of Protector Echo & Airo Filtered Fume Hoods Unique Features

Quick and Easy Echo and Airo Filtered Fume Hood Installation

Literature & Resources

Brochures

Protector Echo and Airo Filtered Fume Hoods Brochure

Spanish-Language Protector Echo and Airo Filtered Fume Hoods Brochure

User's Manuals

Protector Echo and Airo Filtered Fume Hoods Manual (2020-Present)

3-Part Specs

Protector Echo Filtered Fume Hoods Specifications

CAD Drawings

4' Protector Echo Filtered Fume Hood

5' Protector Echo Filtered Fume Hood

6' Protector Echo Filtered Fume Hood

8' Protector Echo Filtered Fume Hood

Revit

4' Protector Echo Revit Files

5' Protector Echo Revit Files

6' Protector Echo Revit Files

8' Protector Echo Revit Files

Installation Qualification / Operation Qualification

Installation Qualification/Operation Qualifications Protocol for Protector Echo and Airo Series Laboratory Fume Hood

Related Products